#04 - South Bend Lathe

Owner: Tom G.
Champion: Jake V.
Champion: Tom K.

South Bend Lathe Work
Model 113-B
Serial Number 113914 D.W.W.

13“ swing
5 feet center to center
Wagner Electric 1 HP motor Model 35E1J27, 220/440volt,3phz (3.1 or 1.55 amp)
1750 RPM at 60hz
Yaskawa variable speed drive (Yaskawa CIMR-V7AM23P7)
NEMA L14-30 plug

Metal Shop

lubrication/maintenance

01/2013 - Arrived

See trainers for sighn off on this and all equipment

Tool South Bend Lathe

Current Approved Trainers: Tom Klein, Bill Williams (AKA BILL²).

Sighned off individuals as of 6/19/2018 @ Last Wiki Update

* Name, Trained By, Trained Date

• Robert Digete TH 7-10-2012
• Bill Murray JH 7-10-2013
• Dennis Drahein JM 7-10-2013
• Era Berna RB 8-16-2013
• Paul Sgneros RB 9-13-2013
• Rick Bowmand RB 11-20-13
• Mykay Antelat RK 8-24-2014
• Emily Mondloch Rk 11-15-2014
• Joseph Cindl TMK 12-3-2014
• Bob Camron TMK 12-31-2014
• Chatlin TKL 1-27-2015
• Jaysen Morrison TMK 5-3-2015
• Joseph Zastron TMK 5-3-2015
• Ed Kofroth TMK 1-15-2016
• ED Kofroth TMK 1-15-2016
• Mathew Metcalf TMK 1-7-2017
• David M Arnold TMK 1-15-2017
• Timathy Cambell TMK 2-25-2017
• Bobby Coom TMK 3-3-2017
• Mitchell Karvey TMK 9-29-2017
• John Lampi TMK 1-27-2018
• Chris Bozel TMK 12-30-2017
• Matt Mazzollk TMK 02-12-2018
• Dan Luglio TMK 06-19-2018
• See Paper sheet for sign offs after this update

Lathe chuck basics https://youtu.be/K67bZQSETiE
Grinding HSS tool bits https://youtu.be/__A2xtLF0AU

Don't have barcode reader? Click here.