#36 Panel Saw
Make/Model
Specs
- Specs are for 6400 model, 6800 is just taller.
- Max. Crosscut: 64“/1625mm
- Max. Rip Cut: Unlimited
- Max. Cut Thickness: 1¾”/45mm
- Cut Accuracy: 1/64“/0,4mm
- Saw Blade Diameter: 8”/200mm
- Motor: 120V, 13amp (220V available)
- Frame Length: 120“/3050mm
- Shipping Weight: 598 lbs./ 271 kg
Current Status
- OK
Approved for use by
- Mike D'Amico (approved by Matt N on 07/10/12)
- Ed H. (approved by Matt N on 07/10/12)
- David S. (approved by Matt N on 07/10/12)
- Steve P. (approved by Matt N on 07/10/12)
- Bret D. (approved by Matt N on 07/10/12)
- Brant H. (approved by Matt N on 07/10/12)
- Vishal R. (approved by Matt N on 07/10/12)
- Matt F. (approved by Matt N on 07/10/12)
- Bob D. (approved by Matt N on 07/10/12)
- Jim R. (approved by Matt N on 07/18/12)
- Chris R. (approved by Matt N on 07/18/12)
- D. Buggs (approved by Matt N on 08/30/12)
- Lance (approved by Brant)
- Alexia (approved by Brant)
Location
- CNC Room at Lenox
Paid for by
- David Buggs - $170 (bought out MattN's portion around October 2012)
- Jack D - $50
- Ron Bean - $40
- Tom Gondek - $50
- Tom Gralewicz - $50
History
02/10/12 - Arrived at Makerspace
12/30/12 - Relocated to Lenox
09/16/13 - Replaced 8” blade
Notes
- Always get assistance cutting large material
- Use caution when placing extension cords across walk paths
- Blade locking pin (for unbolting & replacement) is located on the front left bottom of the saw carriage, under the power button
QR Code
Don't have barcode reader? Click here.