"Green" Dust Collection System

6“ duct system around the perimeter of the room

Serves five 4” connections and a 6“ duct to the table saw

Each 4” connection has a DIY blast gate damper

Pull out on the black loop to open

Push in to close

Connect flexible hose to which ever machine you're using

Close other dampers before turning on dust collector

There is no blast gate damper for the table saw

Dust on the floor can be swept under the table saw and into the duct inlet

Open the panel on the front of the table saw and push sawdust into the inlet with a broom

The on/off switch is a pushbutton down by the motor on the floor

Read more about the "Green" Dust Collector itself here