Oscillating Spindle Sander
Make/Model
Delta Oscillating Spindle Sander
Model# SA350
Specs
Motor: 1/4HP, 3.5 amps, 1725rpm
18“ Cast iron table
Spindle Diamater: 3/4”, 1“, 1.5”, 2“, 3”
Spindle Height: 4-1/2“
Strokes/Min: 60
Stroke: 7/8”
Dust Collection outlet: 1-1/2“
Manual:
http://www.deltamachinery.com/downloads/manuals/sanders/SA350K/DPEC000232_SA350K%20Manual%20Rev%202.pdf
Current Status
OK
Location
Woodshop
On lend from
Matt Neesley
History
Placed in woodshop in 2016
Notes
No sanding bone!
To change drums undo bolt on top of spindle, the bolt is LEFT HANDED!!!!! (Lefty tighty, righty loosey)
Use the proper table insert
Keep spindles, inserts, and other accesories in the base.
QR Code