Table of Contents
2015 Ventilation Projects
- Keeping these all on one page for the moment
- Will probably break them off as they get further along and/or completed
Welder Exhaust Fan Filter Box
- 01/19/15 - Alex M. is interested in helping
- 01/25/15 - Brant, Lance, and ChrisH built a frame
- 02/10/15 - Brant made a sheet metal top for the box
- 02/14/15 - Brant, Adrian, and Jake hung the filter box
- 02/19/15 - Tom and Brant proposed reusable filters be purchased
- 03/13/15 - Filters cut to size and installed, done
Ceramics Kiln
- 12/02/14 - Bill^2 donated a blower fan
- Torrington, Hubbell Special Products #33S0VSC
- PSC, 3 speed
- 115v/1phz/60hz
- 1/15 HP, max 1 amp
- Wiring:
- White = neutral
- Green = ground
- Red = low (77 watts, 0.82 amps)
- Blue = medium (114 watts, 1.18 amps)
- Black = high speed (211 watts, 2.07 amps)
- 01/04/15 - Tom bought a sheet metal hood at an auction
- 03/08/15 - Installed controls and conduit, pulled wire
- 04/07/15 - Fan supports/hanging brackets
- 04/11/15 - Welded supports, hung fan
- 04/16/15 - Cored hole in door
- 05/09/15 - Wired fan, replaced wooden door brace with pipe
- 06/06/15 - Added hood, pulley, counterweight, and flex duct
Paint Room Exhaust Filters
- ?/?/?? - Lance and Tom proposed stuff to the BOD
- 03/13/15 - Mounted wood nailer and metal frames
- 03/20/15 - Filter media installed
PCB Fume Hood Fan
- Tom brought in some flexible ducting
- Do we want to vent this hood?